Square Hole/Silver/4inch Stainless Steel Welded Wire Mesh Panel
Product Descript
Welded wire mesh is made of high quality low carbon steel wire line
of welding and become, then cold (plating), hot dip plating, PVC
plastic coated surface passivation, plasticizing process, smooth
surface, uniform mesh, solder joints strong, local good machining
performance, stability and good anti-corrosion.
Surface treatment: Hot-dipped galvanized after welding, hot dipped
galvanized before welding, PVC coated wire mesh, electro galvanized
after welding, electro galvanized before welding and stainless
steel welded wire mesh.
Welded mesh products are made of high quality wire through
automatic process and sophisticated welding technique. The finished
products is level and flat with sturdy structure.
1.Welded mesh Materials: Galvanized iron wire, hot dip galvanized
iron wire, PVC coated wire, stainless steel wire.
2.Applications: welded mesh mainly used fencing for buildings and
factories, as animal enclose and fence in agriculture andother
uses.
3.Welding characteristics:Including galvanizing before or after
welding.It is devided to hot dipped,electrical galvanizing,PVC
coating,plastic-soaked,special type welded wire mesh.It has the
characteristics of corrosion-resisting and oxidation-resisting.
4.Welded mesh Finish: Electric galvanizing, hot-dip zinc plating,
stainless steel or PVC coatwed.
| Material | Low carbon steel wire Q195, Q235 |
| Surface | Black wire, re-drawing wire, electroc galvanized, hot dipped
galvanized wire, electro galvanized after welding, hot dipped
galvanized after welding, PVC coated |
| Wire Diameter | 0.4mm-3mm |
| Hole (mesh) | 1/2'', 1'', 5/8'', 1/4'', 3/4'', 6/7'' (1''=25.4mm) |
| Length | 15m, 20m, 25m, 30m, 50m |
| Width | 3ft, 4ft, 90cm, 1.2m, 1.5m, 1.8m |
| Package | waterproof paper+plastic film |
Type 2: welded wire mesh panels
| Material | Low carbon steel wire Q195, Q235, stainless steel |
| Surface | Black wire, re-drawing wire, electroc galvanized, hot dipped
galvanized wire, electro galvanized after welding, hot dipped
galvanized after welding, PVC coated |
| Wire Diameter | 1mm-10mm |
| Hole (mesh) | 2.5-25cm |
| Length | ≤8m |
| Width | 0.5-3m |
| Package | pallet or nude packing
|
Specifications
| Material | Wire DIameter(mm) | Mesh Size(mm) | Width(M) | Length(M) |
| SS304 | 2 | 20 | 1 | 2 |
| SS304 | 2 | 50 | 1 | 2 |
| SS304 | 2.5 | 25 | 1 | 2 |
| SS304 | 2.5 | 30 | 1 | 2 |
| SS304 | 2.5 | 40 | 1 | 2 |
| SS304 | 2.5 | 50 | 1 | 2 |
| SS304 | 2.5 | 20 | 1 | 2 |
| SS304 | 3 | 40 | 1 | 2 |
| SS304 | 3 | 30 | 1 | 2 |
| SS304 | 3 | 25 | 1 | 2 |
| SS304 | 3 | 20 | 1 | 2 |
| SS304 | 3 | 50 | 1 | 2 |
| SS304 | 3 | 60 | 1 | 2 |
| SS304 | 4 | 30 | 1 | 2 |
| SS304 | 4 | 50 | 1 | 2 |
| SS304 | 4 | 60 | 1 | 2 |
| SS304 | 4 | 80 | 1 | 2 |
| SS304 | 4 | 100 | 1 | 2 |
| SS304 | 5 | 30 | 1 | 2 |
| SS304 | 5 | 40 | 1 | 2 |
| SS304 | 5 | 50 | 1 | 2 |
| SS304 | 6 | 50 | 1 | 2 |
| SS304 | 6 | 100 | 1 | 2 |
Features for stainless steel welded wire mesh:
* Extra long lifetime, lasting years longer than Galvanized Before
Weld products
* Extreme strength, durability and resistance to rust, corrosion
and harsh chemicals
* Lowest long-term cost of ownership in harsh conditions (higher
initial cost is offset by lower frequency of repair and
replacement)
* Ideal for hard-to-access areas where rust and corrosion are
factors
Q: Can I place an order for some samples?
A: Yes.Of course.
You can order some samples to check the quality
Q: What's your MOQ?
A: If the products you ordered is in stock,MOQ will be
flexible,otherwise,MOQ depend on your detailed specifications.
Anping Huanhang Wire Mesh Co.,Ltd
Contact Person : Ms Anna Zhang
Wechat:15075862223
Email:Anna@huanhangwiremesh.com
phone:+8615075862223
WhatsApp:8615075862223
ADR: Hecun, Anping County, Hengshui, Hebei, China
